HEADWORKS
Merrick (Flow meter system)
An impact flow meter from MERRICK is able to accurately measure the rate of flow of a variety of materials. This function is an essential tool in monitoring the actual flowrate of materials going through a process.
PRIMARY CLARIFICATION
Vaughan (Chopper Pumps)
The Vaughan Chopper Pump is a centrifugal pump with the unique ability of chopping all incoming solids prior to pumping. This not only protects the pump from clogging, but also provides added benefit to downstream components, processes, and the environment.
All wear components are cast steel and heat treated for maximum impact and wear resistance. Combined together, these heavy duty patented components create the ultimate pump for handling severe solids.
SECONDARY PROCESS
Auma (Actuators)
AUMA are well implanted in the water industry due to their broad product portfolio including multi-turn, part-turn, and linear actuators.
SECONDARY CLARIFICATION
LobePro (Sludge Pump)
LobePro rotary lobe pumps are typically used to pump sludge to and from thickeners, separators (such as belt presses, centrifuges, rotary presses), digesters, clarifiers. They are in fact suitable for pumping any WWTP sludge which has had the hard solids over 1/8” and most grit removed for flows up to 2000 gpm and pressures up to 150 PSI.
SLUDGE DIGESTER
LobePro (Sludge Pump)
LobePro rotary lobe pumps are typically used to pump sludge to and from thickeners, separators (such as belt presses, centrifuges, rotary presses), digesters, clarifiers. They are in fact suitable for pumping any WWTP sludge which has had the hard solids over 1/8” and most grit removed for flows up to 2000 gpm and pressures up to 150 PSI.
Vaughan (Rotamix)
Vaughan’s Rotamix® system is the world’s most reliable cost effective means of mechanical hydraulic mixing for sludge tanks, digesters and other high-volume applications.
DEWATERING BIOSOLID TREATMENT
Kennedy Valves (Check Valve)
Kennedy Swing Check Valves are designed and manufactured in conformance with A.W.W.A. C508 and are for use on water, oil and gas lines. Under certain circumstances where it is desirable to have more positive control of the closing of the disc, the valves can be supplied with either lever-and-spring or lever-and-weight.
Lutz Jesco (Chemical Feed Pumps)
Lutz-Jesco centrifugal pumps are specially designed for aggressive media with high flow rates. The wide range of gaskets and materials, and the use of well-proven components, ensure that our products are cost-effective and of high quality.
TERTIARY TREATMENT
Plastomatic (Solenoid Valves)
Electrically actuated valves for severe service applications for virtually all types of solutions. PTFE bellows barrier seal in both direct acting and pilot operated designs, proven million-cycle life provides lowest cost of lifetime ownership. Normally-open and three-way models available. ¼” through 3” sizes.
DISINFECTION
Lutz Jesco (Chlorine Dioxide System)
As water consumption increases, the need for water treatment systems focused on recycling becomes more acute.
Lutz-Jesco systems are designed to DIN standards and promise optimum water quality through precisely measured disinfection.
